| 6 300 kN多向模锻液压机机架的模态分析 |
| |
| 引用本文： | 张倩倩,李晓,王刚,薛克敏.6 300 kN多向模锻液压机机架的模态分析[J].精密成形工程,2011,3(3):42-45,71. |
| |
| 作者姓名： | 张倩倩 李晓 王刚 薛克敏 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院,合肥,230009 |
| |
| 摘 要： | 针对6 300 kN多向模锻液压机的结构特点,利用有限元软件ANSYS对液压机机架进行三维参数化建模,并结合液压机机架的受力情况对机架进行模态分析,从而获得机架前10阶固有频率和相应的固有振型,并详细了分析各阶振型对机架工作状态的影响.
|
| 关 键 词： | 多向模锻液压机 模态分析 动态性能 |
| 收稿时间： | 2010/11/4 0:00:00 |
| 修稿时间： | 2011/5/10 0:00:00 |
Model Analysis of the Frame of 6 300 kN Multi-cored Forging Hydraulic Press |
| |
| ZHANG Qian-qian,LI Xiao,WANG Gang and XUE Ke-min.Model Analysis of the Frame of 6 300 kN Multi-cored Forging Hydraulic Press[J].Journal of Netshape Forming Engineering,2011,3(3):42-45,71. |
| |
| Authors: | ZHANG Qian-qian LI Xiao WANG Gang and XUE Ke-min |
| |
| Affiliation: | ZHANG Qian-qian,LI Xiao,WANG Gang,XUE Ke-min(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China) |
| |
| Abstract: | According to the structural characteristics of 6 300 kN multi-cored forging hydraulic press,the 3D-FEM parameterized model of the frame is established by using the ANSYS.The model analysis of its frame has been conducted with its characteristic of loading.The fore ten natural frequencies and corresponding vibration modes have been gained with the evaluation for each mode.The influence of each mode on working condition is analysed. |
| |
| Keywords: | multi-cored forging hydraulic press model analysis dynamic characteristics |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
