| 纳米CaCO3半金属摩擦材料摩擦磨损性能的研究 |
| |
| 引用本文： | 陈东,黄平,朱文坚.纳米CaCO3半金属摩擦材料摩擦磨损性能的研究[J].机械工程材料,2005,29(2):48-51. |
| |
| 作者姓名： | 陈东 黄平 朱文坚 |
| |
| 作者单位： | 华南理工大学机械工程学院,广东,广州,510641 |
| |
| 基金项目： | 清华大学摩擦学国家重点实验室开放基金资助项目(SKLT02-1) |
| |
| 摘 要： | 使用定速摩擦试验机研究了纳米CaCO3对半金属摩擦材料性能的影响。结果表明：在半金属材料中，用纳米CaCO3代替普通的CaCO3粉体，在混料过程中，纳米CaCO3粒子粘附在其他颗粒和钢纤维表面上，热压成型过程中，作为粘结剂的树脂材料与这些材料之间的结合强度降低。在摩擦过程中，造成表面颗粒在剪切力的作用下，很容易与基体脱离，从而使得摩擦材料的摩擦因数偏小，而磨损率却大大增加。
|
| 关 键 词： | 纳米CaCO3 制动 半金属摩擦材料 摩擦磨损 |
| 文章编号： | 1000-3738(2005)02-0048-04 |
Surface Friction and Wear Properties of the Semi-metallic Friction Materials with Nano-CaCO3 |
| |
| CHEN Dong,HUANG Ping,ZHU Wen-jian.Surface Friction and Wear Properties of the Semi-metallic Friction Materials with Nano-CaCO3[J].Materials For Mechanical Engineering,2005,29(2):48-51. |
| |
| Authors: | CHEN Dong HUANG Ping ZHU Wen-jian |
| |
| Abstract: | The tribological properties of semi-metallic friction materials with nano-SiC were studied. The results indicate that when nano-CaCO_3 powders substituted for the general CaCO_3 powders in a semi-metallic friction material, the friction coefficient of this material decreased and the wear increased. From the SEM images together with the experimental data analysis, it was shown that when the dry powders containing nano-CaCO_3 powders were mixed, the nano-CaCO_3 particles adhered to the surfaces of other ingredients, and the bonding strength between resin and ingredients was reduced during hot molding of the mixture. It induced that the steel fibers and grains were easy to be disengaged from the friction surface under shear stresses. |
| |
| Keywords: | nanometer CaCO_3 brake semi-metallic friction material friction and wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
