| 基于CAE技术的梳理机工作辊设计 |
| |
| 引用本文： | 杨保国.基于CAE技术的梳理机工作辊设计[J].机械工程师,2009(8):71-73. |
| |
| 作者姓名： | 杨保国 |
| |
| 作者单位： | 中原工学院,郑州,450007 |
| |
| 摘 要： | 运用三维设计软件SolidWorks建立了梳理机工作辊的三维几何模型，以Cosmos为有限元分析平台，建立了工作辊的有限元分析模型，确定了计算工况并进行了工作辊的有限元模拟计算，在对工作辊不同尺寸参数对比分析计算结果的基础上，找到了影响工作辊的变形因素，提出了设计工作辊的合理化建议。
|
| 关 键 词： | 梳理机 工作辊 有限元 CAE |
Finite Element Simulation and Analysis of Working-roll of Carder Based on CAE |
| |
| YANG Bao-guo.Finite Element Simulation and Analysis of Working-roll of Carder Based on CAE[J].Mechanical Engineer,2009(8):71-73. |
| |
| Authors: | YANG Bao-guo |
| |
| Affiliation: | YANG Bao-guo (School of Mechanical and Eelectronic, Zhongyuan University of Technology, ZhengZhou 450007, China) |
| |
| Abstract: | This paper found the three-dimensional models of the working-roll of carder by three-dimensional design software Solid Works and the working process of working-rolls is simulated by finite element analysis software Cosmos, which establish calculation work conditions and carry out finite element analysis calculation for the Working-rolls of carder. Through comparison analysis the simulative results that the difference of dimensions parameters for the working-rolls, it found that the important factors of impact of work roll deformation and the reasonable suggestions are proposed to design working-roll. |
| |
| Keywords: | CAE |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
