|
|||||
|
|
| 基于ANSYS的螺簧车架静态强度分析 | |
| 引用本文： | 晁云,曹利钢,陈立伟.基于ANSYS的螺簧车架静态强度分析[J].现代机械,2008(6). |
| 作者姓名： | 晁云 曹利钢 陈立伟 |
| 作者单位： | 1. 江西理工大学南昌校区,江西,南昌,330000 2. 景德镇陶瓷学院,江西,景德镇,333000 3. 江铃陆风汽车有限责任公司研发中心,江西,南昌,330000 |
| 摘 要： | 本文以江铃陆风车系2801000fn型螺簧车架为例,对汽车车架结构进行了建模并确定了车架载荷及约束的处理条件,然后根据该模型采用ANSYS软件对车架在弯曲、扭转、紧急制动和急转弯等四种典型工况进行静态强度分析,从而得到了车架上较大应力的区域,为车架的设计、改进提供了依据。 |
| 关 键 词： | 汽车车架 ANSYS 静态强度 有限元分析 |
The Analysis of Static Intensity of Coil Spring Frame Based on ANSYS |
|
| CHAO Yun,CAO Ligang,CHEN Liwei.The Analysis of Static Intensity of Coil Spring Frame Based on ANSYS[J].Modern Machinery,2008(6). | |
| Authors: | CHAO Yun CAO Ligang CHEN Liwei |
| Abstract: | The article firstly takes coil spring frame of lufeng jianglin corp which type number is 2801000fn as an example to build a model of frame structure and decide disposable condition of frame load and constraint,then the article analyzes static intensity of frame with the established model in four typical work condition in which the frame is distinguishingly in bended, torsional,emergency break and bootleg turn status.by the above analysis,the article thus work out the size of the area on frame where there is hard stress,which affords reference for designing frame and amending frame design. |
| Keywords: | ANSYS |
| 本文献已被 维普 万方数据 等数据库收录！ | |