首页 | 本学科首页   官方微博 | 高级检索  
     

利用改进的EMD和随机减量法识别模态参数
引用本文:彭程,张立民,李原辉,邱飞力. 利用改进的EMD和随机减量法识别模态参数[J]. 噪声与振动控制, 2011, 31(6): 53-56. DOI:  10.3969/j.issn.1006-1355-2011.05.012
作者姓名:彭程  张立民  李原辉  邱飞力
作者单位:( 西南交通大学 牵引动力国家重点实验室, 成都 610031 )
基金项目:国家科技支撑计:划项目(2009BAG12A04-C03)
摘    要:对振动信号进行小波去噪,克服环境噪声的干扰,提高EMD的质量,利用相关系数去除虚伪分量,然后利用随机减量法和ITD法识别出列车地板的固有频率和阻尼比。将此方法识别结果与LMS商业软件识别结果进行对比,频率相对误差不超过6 %,阻尼比相对误差不超过7 %。由此说明该方法具有较高的识别精度。

关 键 词:振动与波  模态参数识别  小波  EMD  随机减量法  ITD   
收稿时间:2010-12-17
修稿时间:2011-02-14

Identification of Modal Parameters Using Improved EMD and Random Decrement Method
PENG Cheng,ZHANG Li-min,LI Yuan-Hui,QIU Fei-Li. Identification of Modal Parameters Using Improved EMD and Random Decrement Method[J]. Noise and Vibration Control, 2011, 31(6): 53-56. DOI:  10.3969/j.issn.1006-1355-2011.05.012
Authors:PENG Cheng  ZHANG Li-min  LI Yuan-Hui  QIU Fei-Li
Affiliation:( Traction Power Lab, Southwest Jiao tong University, Chengdu 610031, China )
Abstract:In order to overcome the interference of environmental noise and improve the quality of EMD, the wavelet method is used to eliminate the noise signal. The correlation coefficients are applied to remove the pseudo components. And then, the random decrement method and ITD method are used to identify the natural frequency and damping ratio of train' s floor. Compared the identification results with those from LMS commercial software, it is found that the relative error of frequency is less than 5%, the relative error of damping ratio is less than 7%. This shows that the method has high precision of identification.
Keywords:vibration and wave  modal parameter identification  wavelet  EMD  random decrement method  ITD
本文献已被 维普 等数据库收录!
点击此处可从《噪声与振动控制》浏览原始摘要信息
点击此处可从《噪声与振动控制》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号