| 整车NVH结构噪声子系统设计方法研究 |
| |
| 引用本文： | 张守元,张义民. 整车NVH结构噪声子系统设计方法研究[J]. 噪声与振动控制, 2011, 31(6): 131-134. DOI: 10.3969/j.issn.1006-1355-2011.06.029 |
| |
| 作者姓名： | 张守元 张义民 |
| |
| 作者单位： | ( 1. 上海汽车集团股份有限公司 研究院， 南京 210028；2. 东北大学 机械工程与自动化学院， 沈阳 110004 ) |
| |
| 摘 要： | 提出一种研发初期中频室内结构噪声设计方法，根据数字“骡子样车”和参考样车模型有限元仿真结果，确定主要传递路径的结构噪声根源并设置相应子系统NVH性能目标，通过子系统性能的提高实现整车目标。最后通过动力总成结构噪声设计实例验证了子系统设计方法的有效性。
|
| 关 键 词： | 声学 NVH 结构噪声 有限元仿真 |
| 收稿时间： | 2011-07-04 |
| 修稿时间： | 2011-09-06 |
Study on the Design Method of Subsystems for NVH Structure-borne Noise |
| |
| ZHANG Shou-yuan,ZHANG Yi-min. Study on the Design Method of Subsystems for NVH Structure-borne Noise[J]. Noise and Vibration Control, 2011, 31(6): 131-134. DOI: 10.3969/j.issn.1006-1355-2011.06.029 |
| |
| Authors: | ZHANG Shou-yuan ZHANG Yi-min |
| |
| Affiliation: | ( 1. Shanghai Automobile Corporation R & D Center, Nanjing 210028, China ; 2. School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, China ) |
| |
| Abstract: | A method for vehicle interior structure noise design in the middle frequency range in early stage of development is proposed in this paper. The dominant cause of structure noise for main transfer path is determined according to the simulation resuk of the ＂Digital Mule＂ vehicle model and the reference vehicle model, and then NVH performance targets for corresponding subsystems are established. The overall target is finally reached by achieving subsystem targets. An example for powertrain induced noise confirms the efficiency of the proposed method. |
| |
| Keywords: | acoustics NVH structure-borne noise finite element simulation |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《噪声与振动控制》浏览原始摘要信息 |
|
点击此处可从《噪声与振动控制》下载全文 |
