| 正交面齿轮的设计与插齿加工试验 |
| |
| 引用本文： | 姬存强,魏冰阳,邓效忠,赵宁.正交面齿轮的设计与插齿加工试验[J].机械传动,2010,34(2). |
| |
| 作者姓名： | 姬存强 魏冰阳 邓效忠 赵宁 |
| |
| 作者单位： | 1. 河南科技大学,机电工程学院,河南,洛阳,471003
2. 西北工业大学,机电工程学院,陕西,西安,710072 |
| |
| 基金项目： | 国家自然科学基金(No:50675176) |
| |
| 摘 要： | 根据面齿轮与渐开线圆柱齿轮的啮合原理,建立了面齿轮插齿加工的数学模型,推导了面齿轮的齿面方程,确定了面齿轮的最小内半径和最大外半径。设计制作了面齿轮插齿工装,在Y514型插齿机上进行了插齿加工试验。并在滚动检验机上进行了接触印痕检验。试验证明了,理论推导和计算结果的正确性,面齿轮插齿加工的可行性。
|
| 关 键 词： | 面齿轮 齿面方程 插齿 接触印痕 |
Design and Gear Shaping Experiment on Orthogonal Face Gear |
| |
| Ji Cunqiang,Wei Bingyang,Deng Xiaozhong,Zhao Ning.Design and Gear Shaping Experiment on Orthogonal Face Gear[J].Journal of Mechanical Transmission,2010,34(2). |
| |
| Authors: | Ji Cunqiang Wei Bingyang Deng Xiaozhong Zhao Ning |
| |
| Affiliation: | 1 College of mechanical & electronic Engineering/a>;Henan University of Science and Technology/a>;Luoyang 471003/a>;China;2 College of mechanical & electronic Engineering/a>;Northwestern Polytechnical University/a>;Xi'an 710072/a>;China |
| |
| Abstract: | Based on the mesh theory of face-gear and spur involute gear,the mathematical model of the orthogonal face-gear shaping is established.The tooth profile equations of face-gear shaping are obtained.The dimension of the face-gear is determined.The design and fabrication of the face-gear shaping worktable are done.The shaping trial is carried out in the shaping machine Y514, and the tooth surface contact pattern is obtained by the rolling inspection.It is proved on the theoretic derivation and the feasibility ... |
| |
| Keywords: | Face-gear Tooth surface equations Gear shaping Contact pattern |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
