Influence of nitrogen in the shielding gas on corrosion resistance of duplex stainless steel welds |
| |
Authors: | R. B. Bhatt H. S. Kamat S. K. Ghosal P. K. De |
| |
Affiliation: | (1) Advanced Fuel Fabrication Facility, BARC, Tarapur, India;(2) Materials Science Division, Bhabha Atomic Research Centre, Trombay, Mumbai, India |
| |
Abstract: | The influence of nitrogen in shielding gas on the corrosion resistance of welds of a duplex stainless steel (grade U-50), obtained by gas tungsten arc (GTA) with filler wire, autogenous GTA (bead-on-plate), electron beam welding (EBW), and microplasma techniques, has been evaluated in chloride solutions at 30 °C. Pitting attack has been observed in GTA, electron beam welding, and microplasma welds when welding has been carried out using pure argon as the shielding gas. Gas tungsten arc welding with 5 to 10% nitrogen and 90 to 95% argon, as the shielding gas, has been found to result in an improved pitting corrosion resistance of the weldments of this steel. However, the resistance to pitting of autogenous welds (bead-on-plate) obtained in pure argon as the shielding gas has been observed to remain unaffected. Microscopic examination, electron probe microanalysis (EPMA), and x-ray diffraction studies have revealed that the presence of nitrogen in the shielding gas in the GTA welds not only modifies the microstructure and the austenite to ferrite ratio but also results in a nearly uniform distribution of the various alloying elements, for example, chromium, nickel, and molybdenum among the constitutent phases, which are responsible for improved resistance to pitting corrosion. |
| |
Keywords: | Ar-N2 shielding gas duplex stainless steel gas tungsten arc welding pitting corrosion |
本文献已被 SpringerLink 等数据库收录! |
|