| 影响测量侵彻过程减加速度因素的探索 |
| |
| 引用本文： | 杨超,赵宝荣,田时雨,付克勤.影响测量侵彻过程减加速度因素的探索[J].兵器材料科学与工程,2002,25(4):3-6. |
| |
| 作者姓名： | 杨超 赵宝荣 田时雨 付克勤 |
| |
| 作者单位： | 兵器工业第五二研究所,包头,014034 |
| |
| 摘 要： | 将93钨合金材料制成模拟弹体,用37mm口径火炮发射, 打击603装甲钢,进行穿深实验,研究弹体结构、弹速、靶板状态对壳体状态的影响.结果发现,当弹速在400 m/s以上时,弹体在侵彻过程中均发生破碎,这表明,在这种实验条件下,不能采用弹内装动态参数存储计的方法测量侵彻过程中的减加速度.
|
| 关 键 词： | 侵彻 装甲防护 测量减加速度 |
| 文章编号： | 1004-244X(2002)04-0003-04 |
| 修稿时间： | 2001年9月17日 |
Research of effective factors of measuring deceleration during penetrating |
| |
| YANG Chao,ZHAO Bao-rong,TIAN Shi-yu,FU Ke-qin.Research of effective factors of measuring deceleration during penetrating[J].Ordnance Material Science and Engineering,2002,25(4):3-6. |
| |
| Authors: | YANG Chao ZHAO Bao-rong TIAN Shi-yu FU Ke-qin |
| |
| Abstract: | A penetrating testing was carried out through hitting 603 armour steel with high explosive shell simulacrums made of 93 W alloy fired from a 37mm gun to investigate the effect of shell body structure, shell velocity and target state on the shell states. The results show that, shell bodies will break in the course of penetrating when shell velocities are above 400m/s, which indicates that the deceleration in the course of penetrating can't be measured by a dynamic parameter storage meter fixed in shell body under the testing conditions. |
| |
| Keywords: | penetrating armour protection measuring deceleration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
