首页 | 本学科首页   官方微博 | 高级检索  
     

中间包底吹氩水模型试验及冶金效果
引用本文:崔衡,唐德池,包燕平.中间包底吹氩水模型试验及冶金效果[J].钢铁钒钛,2010,31(1):36-39.
作者姓名:崔衡  唐德池  包燕平
作者单位:北京科技大学冶金工程研究院,北京,100083
基金项目:“十一五”国家科技支撑计划项目(2006BAE03A06)
摘    要:通过水模型试验和工业试验,研究了中间包底吹氩参数对中间包流场的影响。水模型试验结果表明:中间包底吹气可以改善中间包流场,较佳的吹气参数是透气砖距离冲击区765 mm,吹气量在0.06~0.10 m3/h。工业试验结果表明:中间包采用底吹氩后,TO]降低了26.67%;大型夹杂物总含量由0.430 mg/kg降至0.079 mg/kg,降低了81.82%。

关 键 词:中间包  吹氩  水模型  气幕挡墙  夹杂物  

Study of Water Modeling and Metallurgical Effects on Argon Blowing at Tundish Bottom
Cui Heng,Tang Dechi,Bao Yanping.Study of Water Modeling and Metallurgical Effects on Argon Blowing at Tundish Bottom[J].Iron Steel Vanadium Titanium,2010,31(1):36-39.
Authors:Cui Heng  Tang Dechi  Bao Yanping
Affiliation:Research Institute of Metallurgical Engineering;University of Science and Technology Beijing;Beijing 100083;China
Abstract:The influence of argon blowing at tundish bottom on flow field in tundish was studied by water modeling and industrial trial.Water modeling results showed argon bubbling could improve flow field obviously.The optimum argon blowing parameter is that the distance of permeable brick and ladle nozzle is 765 mm and argon blowing volume is between 0.06 m3/h and 0.10 m3/h.Industrial trial results showed the total oxygen content of slab was decreased 26.67% after acting argon bubbling curtain in tundish.With argon ...
Keywords:tundish  argon blowing  water modeling  gas curtain  inclusion  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号