Chitosan modified with Reactive Blue 2 dye on adsorption equilibrium of Cu(II) and Ni(II) ions

This study aimed at immobilizing Reactive Blue 2 (RB 2) dye in chitosan microspheres through nucleophilic substitution reaction. The adsorbent chemical modification was confirmed by Raman spectroscopy and thermogravimetric analysis. This adsorption study was carried out with Cu(II) and Ni(II) ions and indicated a pH dependence, while the maximum adsorption occurred around pH 7.0 and 8.5, respectively. The pseudo second-order kinetic model resulted in the best fit with experimental data obtained from Cu(II) (R = 0.997) and Ni(II) (R = 0.995), also providing a rate constant, k₂, of 4.85 × 10⁻⁴ and 3.81 × 10⁻⁴ g (mg min)⁻¹, respectively, thus suggesting that adsorption rate of metal ions by chitosan-RB 2 depends on the concentration of ions on adsorbent surface, as well as on their concentration at equilibrium. The Langmuir and Freundlich isotherm models were employed in the analysis of the experimental data for the adsorption, in the form of linearized equations. Langmuir model resulted in the best fit for both metals and maximum adsorption was 57.0 mg g⁻¹ (0.90 mmol g⁻¹) for Cu(II) and 11.2 mg g⁻¹ (0.19 mmol g⁻¹) for Ni(II). The Cu(II) and Ni(II) ions were desorbed from chitosan-RB 2 with aqueous solutions of EDTA and H₂SO₄, respectively.