首页 | 本学科首页   官方微博 | 高级检索  
     

微量Sc、Ti对商业纯Al拉伸性能的影响
引用本文:李杨,李卫华,蔡彬.微量Sc、Ti对商业纯Al拉伸性能的影响[J].热加工工艺,2009,38(20).
作者姓名:李杨  李卫华  蔡彬
作者单位:郑州大学物理工程学院,河南,郑州,450052
基金项目:中国教育部留学回国科研启动资金 
摘    要:研究了微量Sc、Ti对商业纯Al微结构和室温拉伸性能的影响.发现Sc、Ti联合添加能显著细化纯Al晶粒尺寸,而且细化效果随Ti含量增加而增加.Al-Sc-Ti合金托伸性能的改善主要与次生Al_3(Sc,Ti)沉淀有关,而与晶粒尺寸关系不大.尽管Ti含量增加能适当提高合金的热稳定性和屈服强度,但会导致最大抗拉强度和应变硬化强度降低.

关 键 词:Al-Sc-Ti合金  晶粒尺寸  时效  拉伸性能  沉淀

Effect of Trace Sc and Ti on Tensile Properties of Commercial Pure Al
LI Yang,LI Weihua,CAI Bin.Effect of Trace Sc and Ti on Tensile Properties of Commercial Pure Al[J].Hot Working Technology,2009,38(20).
Authors:LI Yang  LI Weihua  CAI Bin
Abstract:The effects of trace Sc and Ti on the microstructure and room-temperature tensile property of commercial pure Al were investigated. It is found that the joint addition of Sc and Ti can refine the grain size of pure Al markedly; and the extent of refinement increases with the increase of Ti content. The improvement of tensile properties of Al-Sc-Ti alloys is mainly associated with the secondary Al_3 (Sc, Ti) precipitation, and independent of the grain size. Although the increase of Ti concent can increase the thermal stability and yield strength, it decreases the maximum of tensile strength and strain-hardening strength.
Keywords:Al-Sc-Ti alloys  grain size  aging  tensile properties  precipitation
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号