| Abstract: | This study investigated the effect of solubility of amphiphilic compounds of acidic crude oil in water on the surface and interfacial tension (IFT) with NaCl, MgCl2, CaCl2, and Na2SO4 salts. Accordingly, distilled water, along with the salts mentioned in zero ionic strength up to 2 mol were put in contact with crude oil to become saturated with amphiphilic compounds. The effects of these compounds were investigated on the properties of contact water by pH, total organic carbon (TOC), FTIR (Fourier transform infrared spectroscopy), water-air surface tension (ST), and water-n-decane IFT tests. The results showed that some of the organic components of crude oil, especially acidic and basic compounds, are present or soluble in water, which have a significant effect on reducing the surface and IFT. The IFT reduction of water-n-decane was greater than the water-air ST system. Also, the observations showed that for both NaCl and Na2SO4 salt water, with increasing ionic strength of water, there was an optimum salinity within the range of 0.1-0.25 mol/L for both salts with the amount of surface and IFT minimized at this point. In the other two salts, this point was delayed upon elevation of ionic strength and was observed at high salinity. In this case, divalent cations reduce tension rate compared to monovalent cations. Due to solubility of acidic and basic groups in water, pH of salt water illustrates an acidic trend. Results of the FTIR test confirmed solubility of these compounds as well. |
