| 纯钛表面等离子渗镍合金层的显微组织及摩擦学性能 |
| |
| 引用本文： | 王泽莹,张峰,王振霞,贺志勇,刘小萍,唐宾. 纯钛表面等离子渗镍合金层的显微组织及摩擦学性能[J]. 机械工程材料, 2012, 0(4): 73-76 |
| |
| 作者姓名： | 王泽莹 张峰 王振霞 贺志勇 刘小萍 唐宾 |
| |
| 作者单位： | 太原理工大学表面工程研究所 |
| |
| 基金项目： | 国家自然科学基金资助项目(51071106,50671071);太原市科技项目计划明星专项(08121030);山西省留学基金资助项目(2008-38) |
| |
| 摘 要： | 采用等离子表面合金化技术对纯钛进行表面渗镍处理,对渗镍后形成的合金层显微组织、物相组成及硬度进行了分析,并对其摩擦学性能进行了研究。结果表明:渗镍后在纯钛表面形成了与基体结合良好的钛-镍合金层,合金层主要由Ti2Ni、TiNi及钛相组成,厚约30μm,显微硬度约为570HV,合金层的干滑动摩擦磨损性能较纯钛基体的有很大提高。
|
| 关 键 词： | 纯钛 钛-镍合金层 等离子渗镍 摩擦学性能 |
Microstructure and Tribology Property of Plasma Nickelized Alloy Layer on Pure Titanium Surface |
| |
| WANG Ze-ying,ZHANG Feng,WANG Zhen-xia,HE Zhi-yong,LIU Xiao-ping,TANG Bin. Microstructure and Tribology Property of Plasma Nickelized Alloy Layer on Pure Titanium Surface[J]. Materials For Mechanical Engineering, 2012, 0(4): 73-76 |
| |
| Authors: | WANG Ze-ying ZHANG Feng WANG Zhen-xia HE Zhi-yong LIU Xiao-ping TANG Bin |
| |
| Affiliation: | (Research Institute of Surface Engineering,Taiyuan University of Technology,Taiyuan 030024,China) |
| |
| Abstract: | Plasma surface alloying technology was applied to nickelizing on pure titanium surface.The microstructure,phase and hardness of the alloy layer formed after nickelizing were analyzed,and the tribology property of the alloy layer was studied.The results show that the Ti-Ni alloy layer with a thickness of about 30 μm was well bonded with pure titanium substrate and mainly consisted of Ti2Ni,TiNi and Ti phases.The microhardness of the alloy layer was about 570 HV.The dry sliding friction and wear property of the alloy layer was improved obviously comparing with that of pure titanium substrate. |
| |
| Keywords: | pure titanium Ti-Ni alloyed layer plasma nickelizing tribology property |
| 本文献已被 CNKI 等数据库收录！ |
|
