| Abstract: | A new ultrasonic inspection system was developed to obtain ultrasonic images of defects. This system adopts an electronic beam control method using array transducers. The beam control modes are a compound scanning mode and a linear scanning mode. Both modes are performed by timing control of ultrasonic wave transmission and reception at each transducer element.In the focal beam, the refraction of the ultrasonic wave at the boundary between water and metal in immersion testing is utilized to improve the lateral resolution of the ultrasonic beam. In steel, the improvement is a maximum of 25% for focal lengths from 5 to 35 mm as compared to lateral resolution not utilizing refraction.This system successfully imaged two side drilled holes in a steel block. |
