| PROFIBUS-DP在轧钢厂双边剪控制系统中的应用 |
| |
| 引用本文： | 魏伟,周国荣. PROFIBUS-DP在轧钢厂双边剪控制系统中的应用[J]. 计算机测量与控制, 2006, 14(5): 628-629,647 |
| |
| 作者姓名： | 魏伟 周国荣 |
| |
| 作者单位： | 中南大学,信息科学与工程学院,湖南,长沙,410083;中南大学,信息科学与工程学院,湖南,长沙,410083 |
| |
| 摘 要： | PROFIBUS-DP最主要的应用就是工业现场级主从站之间周期的数据交换,从而实现工业控制网络的实时通讯;针对一个兼有高度实时性和快速性的多机械联动的复杂机组传动系统,提出了基于PROFIBUS-DP的现场总线控制系统;根据系统的实际应用,分析了不同情况下总线循环周期的变化,总结了影响控制系统实时性的几个因素,最后给出了提高系统实时性的几个建议.
|
| 关 键 词： | PROFIBUS-DP 实时性 总线循环周期 |
| 文章编号： | 1671-4598（2006）05-0628-02 |
| 收稿时间： | 2005-07-12 |
| 修稿时间： | 2005-07-122005-08-18 |
Application of PROFIBUS-DP in the Double-side Shears Control System in Rolling Mill |
| |
| Wei Wei,Zhou Guorong. Application of PROFIBUS-DP in the Double-side Shears Control System in Rolling Mill[J]. Computer Measurement & Control, 2006, 14(5): 628-629,647 |
| |
| Authors: | Wei Wei Zhou Guorong |
| |
| Affiliation: | College of Information Science and Engineering, Central South University, Changsha 410083, China |
| |
| Abstract: | The main application of PROFIBUS-DP is the cyclic data exchange between master and slave devices, thus realizes the real -time communication in the industrial control system. For a highly real-time, rapid, and multi-machine complicated driving system, a fieldbus control system based on PROFIBUS-DP is proposed. According to practical application, the variation of the bus cycle time under different circumstances is analyzed, some factors that influence the real- time property are summarized, and finally some suggestions on how the real-time property could be improved are given. |
| |
| Keywords: | PROFIBUS-DP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
