首页 | 本学科首页   官方微博 | 高级检索  
     

钢中铝夹杂物原位统计分布分析的判据方法
引用本文:张秀鑫,贾云海,陈吉文,李美玲,王海舟. 钢中铝夹杂物原位统计分布分析的判据方法[J]. 冶金分析, 2006, 26(4): 1-1
作者姓名:张秀鑫  贾云海  陈吉文  李美玲  王海舟
作者单位:钢铁研究总院,钢铁研究总院,钢铁研究总院,钢铁研究总院,钢铁研究总院 北京100081,北京100081,北京100081,北京100081,北京100081
基金项目:科技部仪器改造升级项目(JG-99-5)
摘    要:应用金属原位分析仪对含铝夹杂物的参考物样品进行分析,得出铝夹杂物单次火花强度信号分布规律。采用迭代法确定夹杂物定量分析的重要参数——阈值,提出钢中铝夹杂物定量分析新方法,结合化学相分析结果以及金相检测结果最终得到参考物样品中铝夹杂物的含量与火花频数的数学模型。把该数学模型应用到实际钢铁材料中,测得结果与ICP-AES法分析结果一致。

关 键 词:原位分析  铝夹杂物  阈值  
文章编号:1000-7571(2006)04-0001-04
收稿时间:2004-07-15
修稿时间:2005-10-12

The criterion of original position statistic distribution analysis for the aluminum inclusion in steel
ZHANG Xiu-xin,JIA Yun-hai,CHEN Ji-wen,LI Mei-ling,WANG Hai-zhou. The criterion of original position statistic distribution analysis for the aluminum inclusion in steel[J]. Metallurgical Analysis, 2006, 26(4): 1-1
Authors:ZHANG Xiu-xin  JIA Yun-hai  CHEN Ji-wen  LI Mei-ling  WANG Hai-zhou
Abstract:The determination of reference samples containing aluminum inclusion has been studied by original position analyzer for metal, and the distribution rule of the single spark discharge intensity was gained. An important parameter for the analysis of inclusion threshold value has been confirmed with step by step method. A new method for the quantitative analysis of Al inclusion in steel has been founded. According to the results obtained by chemical analysis of phase and metallographic examination, a mathematic mode of the relation between the content of aluminum inclusion and relative frequency of abnormal spark signal has been established. When the mathematic mode was applied to the factual samples, the analytical results found by OPA were accordance with those measured by ICP-AES.
Keywords:original position analysis  aluminum inclusion  threshold value
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《冶金分析》浏览原始摘要信息
点击此处可从《冶金分析》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号