Influence of silicon on the corrosion behaviour of Al–Zn–In–Mg–Ti sacrificial anode

The influence of Si on the corrosion behaviour of Al–5Zn–0.03In–1Mg–0.05Ti (wt.%) alloy was investigated by the microstructure observation and electrochemical measurements in order to improve its corrosion non-uniform and electrochemical properties. The main precipitates in Al–5Zn–0.03In–1Mg–0.05Ti–0.1Si (wt.%) alloy is Mg₂Si phase, which decrease the galvanic corrosion because the potential difference between Mg₂Si and a-Al is smaller than that between MgZn₂ and a-Al. The addition of Si improves the corrosion uniformity of the anode due to the fine equiaxed grains and grain boundaries where Mg₂Si particles uniformly distributed. The results indicate that the microstructure, electrochemical characteristics and corrosion uniformity can be improved significantly after adding 0.1 wt.% Si into Al–5Zn–0.03In–1Mg–0.05Ti (wt.%) alloy.