| 基于迭代学习的粉末成形压机控制策略仿真 |
| |
| 引用本文： | 高俊,颜国义,彭根运,孙苗,喜冠南. 基于迭代学习的粉末成形压机控制策略仿真[J]. 流体传动与控制, 2013, 0(1): 25-28 |
| |
| 作者姓名： | 高俊 颜国义 彭根运 孙苗 喜冠南 |
| |
| 作者单位： | 南通大学机械工程学院;南通国谊锻压机床有限公司 |
| |
| 基金项目： | 江苏省科技支撑计划,高节能型稀土永磁全自动取向净成型设备(BE2011116);南通市传热强化与过程节能重点实验室(CP12012004) |
| |
| 摘 要： | 为了研究PI型迭代学习控制应用于有周期性动作的粉末成形压机位置控制的性能,首先,介绍了迭代学习控制的基本原理;然后,建立了液压机的主缸控制系统数学模型;最后,基于Matlab/Simulink软件建立了控制系统仿真模型,并对采用PI型迭代学习控制的系统输出位移响应进行了仿真。仿真结果表明,迭代学习控制策略应用于液压机位置控制是可行的。
|
| 关 键 词： | 粉末成型压机 位置控制系统 迭代学习控制 仿真 |
Simulation of Power Metallurgic Forming Machine Based on the Iterative Learning Control Strategy |
| |
| Gao Jun Yan Guoyi Peng Genyun Sun Miao Xi Guannan. Simulation of Power Metallurgic Forming Machine Based on the Iterative Learning Control Strategy[J]. Fluid Power Transmission & Control, 2013, 0(1): 25-28 |
| |
| Authors: | Gao Jun Yan Guoyi Peng Genyun Sun Miao Xi Guannan |
| |
| Affiliation: | Gao Jun Yan Guoyi Peng Genyun Sun Miao Xi Guannan |
| |
| Abstract: | In order to research the Iterative Learning Control (ILC) applying in power metallurgic forming press machine, the basic principle of the ILC strategy is introduced in this paper. The mathematical model of the main hydraulic cylinder of press system is introduced in detail. The simulation model is also built based on Matlab/Simulink. The simulation results of ILC strategy are obtained. And then, the results show that it is feasible to apply the ILC strategy to power metallurgic forming press machine. |
| |
| Keywords: | power metallurgic forming press machine position control system iterative learning control simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
