| 羟基磷灰石陶瓷纤维制作工艺的研究 |
| |
| 引用本文： | 刘涛,翁成,梁列峰. 羟基磷灰石陶瓷纤维制作工艺的研究[J]. 产业用纺织品, 2009, 27(12) |
| |
| 作者姓名： | 刘涛 翁成 梁列峰 |
| |
| 作者单位： | 西南大学材料科学与工程学院,重庆,400716;江苏工业学院化学化工学院,常州,213164;西南大学纺织服装学院,重庆,400716 |
| |
| 基金项目： | 重庆市教委科学研究计划，西南大学实验创新基金 |
| |
| 摘 要： | 采用甲壳素(CT)纤维做前驱体制备羟基磷灰石(HA)陶瓷纤维。首先配制CT纤维的纺丝液,将HA粉体分散在该溶液里,通过溶胶—凝胶法制得HA-CT陶瓷初生纤维,再对初生纤维进行表面裂纹化处理以及一定晶化烧结处理。通过对烧结后的纤维的表面形貌观察及相关检测,确定可工业化生产生物活性材料增强用HA陶瓷纤维的成型工艺。
|
| 关 键 词： | 羟基磷灰石 甲壳素 溶胶-凝胶 陶瓷纤维 |
Study on preparation of hydroxyapatite ceramic fibers |
| |
| Liu Tao,Weng Cheng,Liang Liefeng. Study on preparation of hydroxyapatite ceramic fibers[J]. Technical Textiles, 2009, 27(12) |
| |
| Authors: | Liu Tao Weng Cheng Liang Liefeng |
| |
| Affiliation: | Liu Tao1,Weng Cheng2 , Liang Liefeng3(1.College of Materials Science , Engineering,Southwest University,2.School of Chemistry , Chemical Engineering,Jiangsu Polytechnic University,3.College of Textile , Garment,Southwest University) |
| |
| Abstract: | HA ceramic fibers was prepared via sol-gel route,using chitin fibers as the starting precursors in this paper.Firstly,the spinning solution to make chitin fiber was prepared before the HA grains were equably dispersed into the spinning solution.The primordial HA-CT ceramic fibers prepared by wet spinning were treated for making little crack on surface and then the treated samples were sintered at high temperature.Scanning electron microscopy(SEM) was employed to observe the surface area of sintered fibers.T... |
| |
| Keywords: | hydroxyapatite chitin sol-gel ceramic fiber |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
