| 球墨铸铁主传动器壳体消失模铸造工艺 |
| |
| 引用本文： | 王建民,孙洪超,吴有坤,孙钦德,汪景奇,解明国. 球墨铸铁主传动器壳体消失模铸造工艺[J]. 现代铸铁, 2009, 0(2) |
| |
| 作者姓名： | 王建民 孙洪超 吴有坤 孙钦德 汪景奇 解明国 |
| |
| 作者单位： | 1. 合肥工业大学,材料科学与工程学院,安徽,合肥,230009
2. 合肥铸锻厂,安徽,合肥,230001 |
| |
| 摘 要： | 介绍了用消失模工艺生产球墨铸铁主传动器壳体的工艺过程。为便于安装拆卸,铸件上下两段分开制作模具;采用阶梯式浇注系统,冒口为80mm长、50mm宽、90mm高的长方体;采用雨淋式加砂法,浇注时铸型抽成负压。试样检测结果:抗拉强度为462～487MPa,伸长率在12%～16%;基体中铁素体体积分数占95%左右,球化率达2～3级,满足铸件技术要求。
|
| 关 键 词： | 消失模工艺 主传动器壳体 金相组织 力学性能 |
Lost Foam Casting Process of Nodular Iron Main Driver Housing |
| |
| WANG Jian-min,SUN Hong-chao,WU You-kun,SUN Qin-de,WANG Jing-qi,XIE Ming-guo. Lost Foam Casting Process of Nodular Iron Main Driver Housing[J]. Modern Cast Iron, 2009, 0(2) |
| |
| Authors: | WANG Jian-min SUN Hong-chao WU You-kun SUN Qin-de WANG Jing-qi XIE Ming-guo |
| |
| Affiliation: | 1.College of Materials Science and Engineering; Hefei University of Technology; Hefei 230009; China; 2.Hefei Foundry and Forge Plant; Hefei 230001; China); |
| |
| Abstract: | The lost foam casting production process of nodular iron main driver housing was introduced.The pattern tools of the top part and bottom part of the casting were made separately for easy assembly and disassembly.Step gating system was adopted,and the riser was oblong-shaped with dimension of 80 mm(L)×50 mm(B)×90 mm(H).Raining wise sand filling was adopted.The mould was vacuumized during pouring.The test result of specimens were as follows:tensile strength of 462～ 487 MPa,elongation of 12%～16%;ferrite of abo... |
| |
| Keywords: | lost foam casting process main driver housing microstructure mechanical properties |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
