| 线型聚能装药优化设计 |
| |
| 引用本文： | 崔云航,万文乾,田七,唐献树,邓振伟.线型聚能装药优化设计[J].火工品,2006(4):42-46. |
| |
| 作者姓名： | 崔云航 万文乾 田七 唐献树 邓振伟 |
| |
| 作者单位： | 1. 武汉军械士官学校弹药检测教研室,湖北,武汉,430075
2. 解放军理工大学工程兵工程学院,江苏,南京,210007 |
| |
| 摘 要： | 对80mm厚的大型铝罐进行爆炸切割,需要设计柔性线型聚能装药,采用比较成熟的正交设计法进行优化设计.利用正交表安排试验,然后用数值模拟数据代替试验数据,采用综合平衡法分析数值模拟结果,得出优化后的结构参数,并用试验验证数值模拟的正确性.
|
| 关 键 词： | 爆炸切割 正交设计 数值模拟 聚能装药 |
| 文章编号： | 1003-1480（2006）04-0042-05 |
| 收稿时间： | 2006-04-10 |
| 修稿时间： | 2006年4月10日 |
Optimization Design of Linear Shaped Charge |
| |
| CUI Yun-hang,WAN Wen-qian,TIAN qi,TANG Xian-shu,DENG Zhen-wei.Optimization Design of Linear Shaped Charge[J].Initiators & Pyrotechnics,2006(4):42-46. |
| |
| Authors: | CUI Yun-hang WAN Wen-qian TIAN qi TANG Xian-shu DENG Zhen-wei |
| |
| Abstract: | In order to cut large aluminum jar with 80mm thickness, the flexible linear shaped charge (LSC) is need to be designed, and a relatively mature method of orthogonal design is adopted to optimize factors of LSC. The orthogonal layout is used to arrange tests and data of numerical simulations is substituted for the data of tests, and then the synthesized balance method is adopted to analyze the data of numerical simulation and optimized configuration factors are obtained. At last tests are used to validate the correctness of the numerical simulation. |
| |
| Keywords: | Explosive cutting Orthogonal design Numerical simulation Linear shaped charge |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
