| TiB2/FeMo陶瓷的显微结构与力学性能 |
| |
| 引用本文： | 苗明清,傅正义,张金咏,龚伦军. TiB2/FeMo陶瓷的显微结构与力学性能[J]. 无机材料学报, 2005, 20(2): 499-502 |
| |
| 作者姓名： | 苗明清 傅正义 张金咏 龚伦军 |
| |
| 作者单位： | 武汉理工大学材料复合新技术国家重点实验室,武汉,430070 |
| |
| 基金项目： | 兰州大学甘肃省有色金属实验室基金(2003004) |
| |
| 摘 要： | 以Fe-Mo为助烧剂，通过热压制备了TiB2陶瓷．研究了烧结温度、烧结时间对材料显微结构和力学性能的影响，分析了烧结致密化过程．实验结果表明，随着热压烧结温度升高，材料抗弯强度、洛氏硬度出现峰值，热压烧结时间延长，抗弯强度有所下降．液相烧结的重排阶段致密化速率最快．
|
| 关 键 词： | 金属陶瓷 致密化 热压烧结 显微结构 |
| 文章编号： | 1000-324X(2005)02-0499-04 |
| 收稿时间： | 2004-02-11 |
| 修稿时间： | 2004-04-16 |
Microstructure and Mechanical Properties of TiB2/FeMo Cermet |
| |
| MIAO Ming-Qing,FU Zheng-Yi,ZHANG Jin-Yong,GONG Lun-Jun. Microstructure and Mechanical Properties of TiB2/FeMo Cermet[J]. Journal of Inorganic Materials, 2005, 20(2): 499-502 |
| |
| Authors: | MIAO Ming-Qing FU Zheng-Yi ZHANG Jin-Yong GONG Lun-Jun |
| |
| Affiliation: | StateKeyLaboratoryofAdvancedTechnologyforMaterialsSynthesisandProcessing;WuhanUniversityofTechnology;Wuhan430070;China |
| |
| Abstract: | TiB2 cermet containing 7wt% Fe and 3wt% Mo was fabricated by hot pressing. The effects of sintering temperature, holding time on microstructure and mechanical properties were investigated, the densifacation process during sintering was analysed. The experimental results show that the bending strength and the Rockwell hardness reveal a peak value with the sintering temperature rising up; with holding time prolonged, the bending strength decreases slightly. The densification rate is the fastest in the rearrangement stage during liquid sintering. |
| |
| Keywords: | cermet densification hot pressing microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《无机材料学报》浏览原始摘要信息 |
|
点击此处可从《无机材料学报》下载全文 |
