Different drug incorporation routes in ethylene oxide based copolymers

Coumarin is successfully incorporated in poly(ethylene oxide)‐poly(propylene oxide) block copolymers functionalized with terminal alkynes, PEO‐b‐PPO‐b‐GPE, by click reactions at atmospheric pressure and in CO₂ supercritical conditions (scCO₂). The presence of glycidyl propargyl ether (GPE), an alkynyl‐terminated monomer, in the copolymer chain allows the covalent attachment of the coumarin by click chemistry, obtaining polymer–drug conjugates. First, the most suitable synthesis procedure for the above‐mentioned copolymers was established. Then, the click reactions were carried out confirming the coumarin attachment by Fourier transform IR and ¹H NMR analyses, achieving good yields in both cases with a coumarin content of about 9.3 wt% and avoiding the use of toxic solvents in the case of scCO₂. In addition, thanks to the amphiphilic character of the copolymer due to the presence of hydrophilic (PEO) and hydrophobic (PPO) segments, micelle formation is also possible and was confirmed by dynamic light scattering and high resolution SEM. Finally, coumarin incorporation was achieved by micelle formation using the direct dissolution method in order to compare the polymer–drug system properties. This second route allows a drug entrapment efficiency of 14 wt% to be reached. In both cases, the size of the polymeric micelles obtained is in a suitable range to enable permeability. However, an interesting point is the reduction in the size of the micelles with increase in the GPE percentage and with the covalent attachment of the coumarin to the copolymer, which is supposed to improve their permeability. © 2019 Society of Chemical Industry