| Abstract: | Software‐defined networking (SDN) is a network concept that brings significant benefits for the mobile cellular operators. In an SDN‐based core network, the average service time of an OpenFlow switch is highly influenced by the total capacity and type of the output buffer, which is used for temporary storage of the incoming packets. In this work, the main goal is to model the handover delay due to the exchange of OpenFlow‐related messages in mobile SDN networks. The handover delay is defined as the overall delay experienced by the mobile node within the handover procedure, when reestablishing an ongoing session from the switch in the source eNodeB to the switch in the destination eNodeB. We propose a new analytical model, and we compare two systems with different SDN switch designs that model a continuous time Markov process by using quasi‐birth–death processes: (1) single shared buffer without priority (model SFB), used for all output ports for both control and user traffic, and (2) two isolated buffers with priority (model priority finite buffering [PFB]), one for control and the other for user plane traffic, where the control traffic is always prioritized. The two proposed systems are compared in terms of total handover delay and minimal buffer capacity needed to satisfy a certain packet error ratio imposed by the link. The mathematical modeling is verified via extensive simulations. In terms of handover delay, the results show that the model PFB outperforms the model SFB, especially for networks with high number of users and high probability of packet‐in messages. As for the buffer dimensioning analysis, for lower arrival rates, low number of users, and low probability of packet‐in messages, the model SFB has the advantage of requiring a smaller buffer size. |
