首页 | 本学科首页   官方微博 | 高级检索  
     

气门断裂原因分析
引用本文:马喆,甘春瑾,董文玲. 气门断裂原因分析[J]. 理化检验(物理分册), 2005, 41(2): 96-98
作者姓名:马喆  甘春瑾  董文玲
作者单位:武汉科技大学,武汉,430081;安阳钢铁集团公司,安阳,455004
摘    要:采用宏观断口分析、化学成分分析及金相检验等方法,对发动机排气门杆断裂原因进行了分析。结果表明,气门杆断口附近的近表面基体内存在大量非金属夹杂,同时气门杆表面碳氮共渗层存在黑色组织,这些均是气门杆疲劳强度降低的原因,其中较大尺寸的脆性夹杂物在次表面首先产生微细裂纹,最终导致了疲劳断裂。

关 键 词:气门  断裂  非金属夹杂  失效分析
文章编号:1001-4012(2005)02-0096-03

FRACTURE ANALYSIS OF ENGINE VALVE
MA Zhe,AN Chun-jin,DONG Wen-ling. FRACTURE ANALYSIS OF ENGINE VALVE[J]. Physical Testing and Chemical Analysis Part A:Physical Testing, 2005, 41(2): 96-98
Authors:MA Zhe  AN Chun-jin  DONG Wen-ling
Abstract:By means of macroscopic analysis, chemical composition analysis and microstructure examination, the cracking reason of engine exhaust valve stem has been studied. The results show that a lot of non-metallic inclusions consisting in the valve stem matrix around the fracture and the black microstructure in the gas nitrocarburized layer reduced the fatigue strength of the valve. The relatively high brittle inclusions initiate the microcrack in the sub-surface at first, and the microcrack caused the fatigue fracture at last.
Keywords:Valve  Fracture  Non-metallic inclusion  Failure analysis  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号