Reliability Analysis of Structural Ceramics Subjected to Biaxial Flexure

Sintered alumina and silicon nitride were tested in uniaxial (four-point and three-point bend) and biaxial (uniformpressure-on-disk) flexure tests in inert conditions. Fracture origins were identified to be surface flaws in alumina and subsurface pores in silicon nitride. Batdorf's statistical fracture theory and two different fracture criteria, the critical normal stress criterion and a noncoplanar strain energy release rate criterion, were used to examine size and stress-state effects on fracture strengths of the two ceramics. Size effects assessed in four-point and three-point bend tests were in good agreement with the theoretical predictions for both ceramics. Measured biaxial strengths of alumina were in good agreement with the prediction when a noncoplanar strain energy release rate criterion and random surface flaw orientations were assumed. On the other hand, biaxial fracture strength of the silicon nitride was consistent with a prediction based on preferred flaw orientation (i.e., normal to the principal stress in the disks) and the normal stress fracture criterion. Orientation distributions of the fracture planes assessed from the fracture patterns of the disks supported the assumptions of random flaw orientations (alumina) and the preferred flaw orientations (silicon nitride), respectively, for the two ceramics. The preferred flaw orientation in silicon nitride is suggested to originate at subsurface pores as a result of crack nucleation in the plane of maximum tensile stress concentration, i.e., a diametral plane normal to the maximum principal stress.