| 钛合金镀铬工艺研究 |
| |
| 引用本文： | 周伟岩,康书文.钛合金镀铬工艺研究[J].材料保护,2006,39(1):72-73. |
| |
| 作者姓名： | 周伟岩 康书文 |
| |
| 作者单位： | 中国空空导弹研究院,河南,洛阳,471009;中国空空导弹研究院,河南,洛阳,471009 |
| |
| 摘 要： | 研究了一种可行的工艺方法,在钛及钛合金表面先化学镀镍,再电镀一层铬层,能提高零件表面硬度,能改善其耐磨性,表面硬度可达到HRC 55～60.
|
| 关 键 词： | 钛合金 镀铬 化学镀镍 耐磨性 |
| 文章编号： | 1001-1560（2006）01-0072-02 |
| 收稿时间： | 2005-07-17 |
| 修稿时间： | 2005-07-17 |
Chromium Electroplating Technology for Titanium Alloy |
| |
| ZHOU Wei-yan,KANG Shu-wen.Chromium Electroplating Technology for Titanium Alloy[J].Journal of Materials Protection,2006,39(1):72-73. |
| |
| Authors: | ZHOU Wei-yan KANG Shu-wen |
| |
| Abstract: | A chromium electroplating technology applicable to titanium and its alloy was developed. The effect of the electroplated chromium coating on the hardness and wear resistance of titanium and its alloy was investigated. As the results, it was feasible to carry out chromium electroplating of the titanium and its alloys by introduction of an electroless nickel intermediate layer. The hardness of the titanium alloy and its alloys was greatly increased after the chromium electroplating (The hardness could be as high as HRC 55~60). At the same time, the electroplated chromium coating also contributed to significantly increase the wear resistance of the titanium and its alloys. |
| |
| Keywords: | titanium alloy chromium electroplating electroless nickel plating wear resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
