| 板坯角横裂成因及控制措施 |
| |
| 引用本文： | 刘延强,尹世超,王雷川,景财良,罗磊,张丙龙. 板坯角横裂成因及控制措施[J]. 中国冶金, 2016, 26(11): 58-63. DOI: 10.13228/j.boyuan.issn1006-9356.20160061 |
| |
| 作者姓名： | 刘延强 尹世超 王雷川 景财良 罗磊 张丙龙 |
| |
| 作者单位： | 首钢京唐钢铁联合有限责任公司炼钢作业部， 河北 唐山 063200 |
| |
| 摘 要： | 针对微合金化钢角部横裂纹缺陷，从连铸工艺角度分析了板坯角横裂的形成原因，提出了微合金化钢角部横裂纹缺陷的控制措施。通过优化二次冷却强度、稳定结晶器液面、提高铸机精度、调整二冷喷嘴宽度、采用倒角结晶器及控制钢液增氮等措施，提高了铸坯表面质量，板坯角部横裂纹得到了有效改善，缺陷发生率由24%降低至2%。
|
| 关 键 词： | 微合金钢 角横裂 二次冷却 倒角结晶器 连铸工艺 |
Formation reasons and counter-measures of transverse corner cracks in continuous casting slabs |
| |
| LIU Yan-qiang,YIN Shi-chao,WANG Lei-chuan,JING Cai-liang,LUO Lei,ZHANG Bing-long. Formation reasons and counter-measures of transverse corner cracks in continuous casting slabs[J]. China Metallurgy, 2016, 26(11): 58-63. DOI: 10.13228/j.boyuan.issn1006-9356.20160061 |
| |
| Authors: | LIU Yan-qiang YIN Shi-chao WANG Lei-chuan JING Cai-liang LUO Lei ZHANG Bing-long |
| |
| Affiliation: | Steelmaking Department， Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063200, Hebei, China |
| |
| Abstract: | According to the transverse corner cracks in micro-alloyed steel, the formation reasons of transverse corner cracks in continuous casting slab were determined focusing on continuous casting process parameters, and the control measures were proposed. Through optimizing secondary cooling water, stabilizing mould level, enhancing equipment precision accuracy, adjusting the width of secondary cooling nozzle, employing chamfered mould corner, and controlling nitrogen absorption in molten steel, the slab surface quality is increased. And the transverse corner cracks in continuous casting slab were improved with the occurrence of such defects decreasing from 24% to 2%. |
| |
| Keywords: | micro-alloy steel transverse corner cracks secondary cooling chamfered-corner mould continuous casting process |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国冶金》浏览原始摘要信息 |
|
点击此处可从《中国冶金》下载全文 |
|
