|
|||||
|
|
| Heidenhain iTNC530控制系统机床五轴加工的后置处理及仿真验证 | |
| 引用本文： | 仇振安,刘东晓,张成立,张传峰,李卫星,郭文.Heidenhain iTNC530控制系统机床五轴加工的后置处理及仿真验证[J].电光与控制,2012,19(9):90-93. |
| 作者姓名： | 仇振安 刘东晓 张成立 张传峰 李卫星 郭文 |
| 作者单位： | 1. 陆航驻北京地区代表室,北京,100176 2. 中国航空工业洛阳电光设备研究所,河南洛阳,471009 3. 洛阳天浩泰轨道装备制造有限公司,河南洛阳,471002 4. 洛阳建材机械厂,河南洛阳,471004 |
| 摘 要： | 针对采用Heidenhain iTNC 530控制系统五轴数控机床的特点,基于UG PostBuilder软件设定机床与数控系统参数,采用TCL语言编写用户命令,定制了机床的后置处理,同时把后置处理集成于UG软件之中,通过Vericut软件进行了数控机床建模与加工仿真,使得UG Manufacturing模块生成的刀轨通过后置处理直接生成的NC代码完全能被机床识别;最后以整体叶轮为例进行了五轴联动编程及实际加工,验证了五轴编程和后置处理的正确性。 |
| 关 键 词： | 数控编程 后置处理 五轴加工 数控仿真 |
| 收稿时间： | 2011/8/12 |
Five_Axis NC Post-Processing and NC Machining Simulation of the Machine Based on Heidenhain iTNC530 Control System |
|
| QIU Zhen'an , LIU Dongxiao , ZHANG Chengli , ZHANG Chuanfeng , LI Weixing , GUO Wen.Five_Axis NC Post-Processing and NC Machining Simulation of the Machine Based on Heidenhain iTNC530 Control System[J].Electronics Optics & Control,2012,19(9):90-93. | |
| Authors: | QIU Zhen'an LIU Dongxiao ZHANG Chengli ZHANG Chuanfeng LI Weixing GUO Wen |
| Affiliation: | 1.Deputy Office of Air Forces in Beijing District,Beijing 100176,China;2.Luoyang Institute of Electro-Optical Equipment,AVIC,Luoyang 471009,China;3.Luoyang Tihot Railway Machinery Manufacturing Co.,Ltd,Luoyang 471002,China;4.Luoyang Building Material Machinery Factory,Luoyang 471004,China) |
| Abstract: | Considering the kinematic features of the five-axis machine using Heidenhain iTNC530 control system we exploited this machine's post builder system not only by customizing the parameters of the machine tool and numerical system but also by customizing the “custom commands” using TCL language based on UG＼PostBuilder software.This machine's post builder system was integrated in UG software.The NC codes generated through post processing to the tool paths of the UG Manufacturing were simulated by the Vericut software by the means of machine building and NC simulation.These NC codes are proved to be completely identified by the machine.The five-axis NC programming and post builder system are proved to be correct by using it in actual five-axis milling of integral impeller. |
| Keywords: | NC programming post builder five-axis machining numerical control simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |