| 抽油机双圆弧齿轮减速器传动分析及标准化 |
| |
| 引用本文： | 郭东,邱元奎,杨勇红,刘峰林,赵波.抽油机双圆弧齿轮减速器传动分析及标准化[J].石油矿场机械,2009,38(6):9-12. |
| |
| 作者姓名： | 郭东 邱元奎 杨勇红 刘峰林 赵波 |
| |
| 作者单位： | 1. 中国石油集团,渤海石油装备制造有限公司,天津300457
2. 新疆第三机床厂,乌鲁木齐,830013 |
| |
| 摘 要： | 针对API 11E 抽油机认证不接受在抽油机中采用双圆弧齿轮减速器的问题,在广泛调研我国和国际抽油机及其减速器产品设计、制造标准及应用现状的基础上,分析了抽油机双圆弧齿轮传动及标准化问题,并向国际标准化委员会提出了在抽油机技术规范中增加双圆弧齿轮减速器内容的提案,目前已被采纳.藉此必将提高我国在抽油机领域的核心竞争力.
|
| 关 键 词： | 双圆弧齿轮 减速器 分析 标准化 |
Analysis and Standardization on Transmission of Double-circular-arc-gear Reducer of Pumping Units |
| |
| GUO Dong,QIU Yuan-kui,YANG Yong-hong,LIU Feng-lin,ZHAO Bo.Analysis and Standardization on Transmission of Double-circular-arc-gear Reducer of Pumping Units[J].Oil Field Equipment,2009,38(6):9-12. |
| |
| Authors: | GUO Dong QIU Yuan-kui YANG Yong-hong LIU Feng-lin ZHAO Bo |
| |
| Affiliation: | GUO Dong1,QIU Yuan-kui2,YANG Yong-hong2,LIU Feng-lin2,ZHAO Bo1(1.CNPC Bohai Equipment Manufacturing Co.,Ltd.,Tianjin 300457,China,2.Xinjiang Third Machine Factory,Wulumuqi 830013,China) |
| |
| Abstract: | Double-circular-arc gear is widely used in the reducer of pumping unit in our country,and good results have been obtained after long time use.But if the pumping unit enters into the international market,it must be accepted by API certification,while the double-circular-arc-gear used in the pumping unit was not acceptable in the API 11E.For this reason,on the basis of wide range of investigation for the design,manufacturing standardization of pumping unit and its reducer,as well as their application at home ... |
| |
| Keywords: | double-circular-arc gear reducer analysis standardization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
