| 基于注塑CAE的计算机显示器底座壁厚的优化 |
| |
| 引用本文： | 王金龙,王鹏程,李永艳,张晶. 基于注塑CAE的计算机显示器底座壁厚的优化[J]. 塑料, 2005, 34(6): 71-74 |
| |
| 作者姓名： | 王金龙 王鹏程 李永艳 张晶 |
| |
| 作者单位： | 内蒙古工业大学材料科学与工程学院,内蒙古,呼和浩特,010062;内蒙古农业大学食品科学与工程学院,内蒙古,呼和浩特,010018;内蒙古工业大学材料科学与工程学院,内蒙古,呼和浩特,010062 |
| |
| 基金项目： | 内蒙古科技攻关项目,塑料注塑模CAD/CAM/CAE系统集成软件的研制,980303-1，内蒙古工业大学重点项目,注塑模CAE优化产品设计和注塑成型工艺条件参数的研究ZD200309 |
| |
| 摘 要： | 针对注塑件壁厚优化问题,应用注射过程流动模拟软件HSCAE 3DRF5.1及三维实体造型软件Pro/E2000i,以计算机显示器底座注塑件为实例研究对象,分析其注塑成型工艺参数,运用正交试验法设计模拟方案,进行壁厚优化,确定它的最佳壁厚成型范围及最小壁厚值。
|
| 关 键 词： | 注塑成型 制品设计 计算机辅助工程技术 优化 |
| 文章编号： | 1001-9456(2005)06-0071-04 |
| 修稿时间： | 2005-08-22 |
Wall-thickness Optimization of Monitor Pedestals Based on Injection Molding CAE |
| |
| WANG Jin-long,WANG Peng-cheng,LI Yong-yan,ZHANG Jing. Wall-thickness Optimization of Monitor Pedestals Based on Injection Molding CAE[J]. Plastics, 2005, 34(6): 71-74 |
| |
| Authors: | WANG Jin-long WANG Peng-cheng LI Yong-yan ZHANG Jing |
| |
| Affiliation: | WANG Jin-long~ |
| |
| Abstract: | For the wall-thickness optimization problem in injection molding process,monitor pedestals were regarded as the study object based on the simulation software of filling flow-HSCAE 3DRF5.1 and the three-dimensional modeling software Pro/E2000i.The technical parameters were analysed in injection molding process.The orthogonal-test method was applied to design the simulation scheme in order to optimize wall-thickness of monitor pedestals.The optimized scopes as well as the minimum value of wall-thickness of injection-molding were determined. |
| |
| Keywords: | injection molding product design computer aided engineering optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
