首页 | 本学科首页   官方微博 | 高级检索  
     

硅铝溶胶结合剂对钢包耐火浇注料性能的影响
引用本文:王雪松,兴超,潘峰,许连魁. 硅铝溶胶结合剂对钢包耐火浇注料性能的影响[J]. 安徽工业大学学报, 2013, 0(4): 365-367,373
作者姓名:王雪松  兴超  潘峰  许连魁
作者单位:安徽工业大学冶金与资源学院,安徽马鞍山243002
基金项目:安徽省教育厅重点项目(KJ2010A053)
摘    要:以致密刚玉、尖晶石细粉、氧化铝微粉、镁砂细粉等为原料,硅铝溶胶为结合剂制备钢包浇注料.研究不同硅铝溶胶含量对浇注料试样体积密度、显气孔率、抗折强度、耐压强度和抗渣性等性能的影响.结果表明:随着硅铝溶胶含量的增加,浇注料的显气孔率降低、体积密度增加;浇注料的耐压强度及抗折强度随着硅铝溶胶含量的增加先增大,硅铝溶胶质量分数...

关 键 词:硅铝溶胶  钢包  浇注料  抗渣性

Effects of Silica Alumina Glue Bonder on the Properties of Ladle Refractory Castable
WANG Xuesong;XING Chao;PAN Feng;XU Liankui. Effects of Silica Alumina Glue Bonder on the Properties of Ladle Refractory Castable[J]. Journal of Anhui University of Technology, 2013, 0(4): 365-367,373
Authors:WANG Xuesong  XING Chao  PAN Feng  XU Liankui
Affiliation:WANG Xuesong;XING Chao;PAN Feng;XU Liankui(School of Metallurgy & Resources, Anhui University of Technology, Ma'anshan 243002, China)
Abstract:Using dense corundum,spinel powder,corundum micropowder and fused magnesite powder as starting materials,silica alumina glue bonded ladle castable was prepared.Studies were focused on the effect of silica alumina glue content on properties of the bulk density,apparent porosity,rupture strength,crushing strength and slag resistance.The results show that apparent porosity of the castable reduces and bulk density increases with the increase of silica alumina glue content,while rupture strength and crashing strength of the castable increased with the increase content of silicon and aluminum sol.When silica alumina glue content more than 6%,rupture strength and crushing strength of the castable decrease slowly.And erosion coefficient and permeation coefficient of the castable decrease steadily with the increase of silica alumina glue content.The change trend of erosion coefficient castable and coefficient of permeability are consistent.When content of silica alumina glue is more than 7%,effect on erosion and penetration of the crucible is not particularly obvious.According to the experiment,the silicon aluminum sol binder content should be controlled at 7%.
Keywords:silica alumina glue  ladle  castable  slag resistance
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号