| 超音速激光沉积WC/SS316L复合涂层微观结构及磨损性能研究 |
| |
| 引用本文： | 李波,李鹏辉,张群莉,陈智君,董刚,姚建华. 超音速激光沉积WC/SS316L复合涂层微观结构及磨损性能研究[J]. 电加工与模具, 2016, 0(1): 35-39. DOI: 10.3969/j.issn.1009-279X.2016.01.011 |
| |
| 作者姓名： | 李波 李鹏辉 张群莉 陈智君 董刚 姚建华 |
| |
| 作者单位： | 浙江工业大学激光先进制造研究院,浙江省高端激光制造装备协同创新中心,浙江杭州 310014 |
| |
| 基金项目： | 浙江省公益技术研究工业项目(2014C31122)，浙江省博士后择优资助科研项目(Z42102002)，江苏省光子制造科学与技术重点实验室开放基金资助项目(GZ201311) |
| |
| 摘 要： | 采用超音速激光沉积和冷喷涂技术,在碳钢基体上制备了WC/SS316L复合涂层,利用金相显微镜、扫描电子显微镜、能量色谱仪、摩擦磨损试验机对超音速激光沉积及冷喷涂复合涂层的微观结构、成分及磨损性能进行了对比研究。结果表明:在沉积温度为800℃下制备的超音速激光沉积涂层的沉积效率和WC含量较冷喷涂涂层分别提高了43%和30%,其涂层致密性也优于冷喷涂涂层;超音速激光沉积涂层的摩擦系数比冷喷涂涂层低19%,表现出较优的抗磨损性能。
|
| 关 键 词： | 冷喷涂 激光辐射 复合涂层 微观结构 耐磨性 |
Study on Microstructure and Wear-resistant Properties of WC/SS316L Composite Coatings Prepared by Supersonic Laser Deposition |
| |
| Abstract: | WC/SS316L composite coatings were deposited onto carbon steel substrate by supersonic laser deposition (SLD) and cold spray (CS) respectively. The microstructure ,composition and wear-resistant properties of the as-deposited coatings were comparatively studied with optical microscopy , scanning electron microscopy,energy dispersive spectrometer and wear tester. The results show that deposition efficiency and WC concentration of the SLD specimen (800 ℃) are improved by 43 % and 30 % respectively as compared with those of the CS sample. The coating density of the SLD sample is also superior to that of the CS sample. Moreover ,the friction coefficient of the SLD specimen is 19 %lower than that of the CS specimen,thus exhibiting better wear-resistant properties. |
| |
| Keywords: | cold spray laser irradiation composite coating microstructure wear-resistant |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
