| CSP薄板坯表面纵裂原因及防止措施 |
| |
| 引用本文： | 洪兵雄,毛新平,柴毅忠,朱伯平.CSP薄板坯表面纵裂原因及防止措施[J].钢铁钒钛,2004,25(2):57-61. |
| |
| 作者姓名： | 洪兵雄 毛新平 柴毅忠 朱伯平 |
| |
| 作者单位： | 广州珠江钢铁有限责任公司,广东,广州510730;广州珠江钢铁有限责任公司,广东,广州510730;广州珠江钢铁有限责任公司,广东,广州510730;广州珠江钢铁有限责任公司,广东,广州510730 |
| |
| 摘 要： | 薄板坯表面纵裂是CSP连铸连轧生产线上一个严重的质量缺陷,通过对其产生原因的分析,提出控制废钢质量、钢水成分、钢水浇注过热度、结晶器保护渣、结晶器循环水水质、结晶器与扇形段等设备状态、浸入式水口的安装精度,及保证浇注温度与拉速的匹配关系,可有效控制纵裂缺陷的发生,使纵裂纹比例稳定在0.4%以下。
|
| 关 键 词： | CSP短流程 薄板坯 纵裂 控制措施 |
| 文章编号： | 1004-7638(2004)02-0057-05 |
| 修稿时间： | 2004年3月14日 |
RESEARCH ON FORMING REASONS AND PREVENTION MEASURES OF LONGITUDINAL SURFACE CRACKS ON CSP THIN SLAB |
| |
| HONG Bing-xiong,MAO Xin-ping,CHAI Yi-zhong,ZHU Bo-ping.RESEARCH ON FORMING REASONS AND PREVENTION MEASURES OF LONGITUDINAL SURFACE CRACKS ON CSP THIN SLAB[J].Iron Steel Vanadium Titanium,2004,25(2):57-61. |
| |
| Authors: | HONG Bing-xiong MAO Xin-ping CHAI Yi-zhong ZHU Bo-ping |
| |
| Abstract: | The longitudinal surface crack on thin slab is a serious quality defect at CSP line. Through analyzing the forming reasons, it is found that controlling the scrap quality, liquid steel composition, overheating degree in mould, powder quality, recycling water quality in the mould,keeping good condition of mould and segment,and the installing precision of submerged nozzle are effective to prevent the forming of longitudinal surface crack.Besides,maintain good match relationship between casting temperature and castiong speed is also effective to prevent the forming of longitudinal crack.After adopting the above measures,the rate of forming longitudinal crack is reduced to less than 0.4% stably at Zhujiang Steel. |
| |
| Keywords: | CSP short flow thin slab longitudinal crack controlling measures |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
