| 具有新型空穴缓冲层材料TiO2的有机薄膜发光器件 |
| |
| 引用本文： | 张志峰,邓振波,鲁成祝,徐登辉,张梦欣,梁春军,林鹏,刘青宜.具有新型空穴缓冲层材料TiO2的有机薄膜发光器件[J].光电子．激光,2004,15(5):520-523. |
| |
| 作者姓名： | 张志峰 邓振波 鲁成祝 徐登辉 张梦欣 梁春军 林鹏 刘青宜 |
| |
| 作者单位： | 北方交通大学光电子技术研究所信息存储、显示与材料开放实验室,北京,100044;许昌教育学院,许昌,461000 |
| |
| 基金项目： | 国家自然科学基金资助项目(69976010,10174001,90201004);北方交通大学基金资助项目(2001XM06) |
| |
| 摘 要： | 以溶胶凝胶法制备的TiO2作为空穴缓冲层．在结构为ITO／TiO2／NPB／Alq／LiF／A1的器件中，改善了器件的发光效率。研究了TiO2厚度对器件发光特性的影响。在电流密度为100mA／cm^3时，有缓冲层的器件发光效率为5cd／A，而没有缓冲层的器件发光效率为3．45cd／A，有TiO2缓冲层的器件发光效率有了明显提高。
|
| 关 键 词： | 有机电致发光 TiO2缓冲层 Sol-gel |
| 文章编号： | 1005-0086(2004)05-0520-04 |
Improvement of the Organic EL Devices by Insertion of Nanometer Layer TiO2 |
| |
| ZHANG Zhi-feng.Improvement of the Organic EL Devices by Insertion of Nanometer Layer TiO2[J].Journal of Optoelectronics·laser,2004,15(5):520-523. |
| |
| Authors: | ZHANG Zhi-feng |
| |
| Affiliation: | ZHANG Zhi-feng~ |
| |
| Abstract: | TiO_2 achieved by the Sol-gel method are inserted in organic EL devices as a buffer layer.The effect of the different TiO_2 thickness on the device with the structure ITO/TiO_2/NPB/Alq_3/LiF/Al.When the buffer layer is 2 nm thickness,the voltage of the devices decreases and the current density of the devices increases,because of the tunneling effect,and the efficiency of the device is best at the buffer layer thickness of 6 nm,because of the balance of the injecting hole and electron.As the current density is 100 cd/mA~2,the efficiency of the 6 nm-thickness buffer layer device is 5 cd/A,and that without buffer layer device is 3.45 cd/A.The smooth of the ITO surface is also a factor that the efficiency increases. |
| |
| Keywords: | OLED TiO_2 buffer layers carrier balance Sol-gel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《光电子．激光》浏览原始摘要信息 |
|
点击此处可从《光电子．激光》下载全文 |
|
