AFM characterization of model nuclear fuel oxide multilayer structures modified by heavy ion beam irradiation

This work explored a potential new model dispersion fuel form consisting of an actinide material embedded in a radiation tolerant matrix that captures fission products (FPs) and is easily separated chemically as waste from the fuel material. To understand the stability of this proposed dispersion fuel form design, an idealized model system composed of a multilayer film was studied. This system consisted of a tri-layer structure of an MgO layer sandwiched between two HfO₂ layers. HfO₂ served as a surrogate fissile material for UO₂ while MgO represented a stable, fissile product (FP) getter that is easily separated from the fissile material. This type of multilayer film structure allowed us to control the size of and spacing between each layer. The films were grown at room temperature by e-beam deposition on a Si(1 1 1) substrate and post-annealed annealing at a range of temperatures to crystallize the HfO₂ layers. The 550 °C annealed sample was subsequently irradiated with 10 MeV Au³⁺ ions at a range of fluences from 5 × 10¹³ to 3.74 × 10¹⁶ ions/cm². Separate single layer constituent films and the substrate were also irradiated at 5 × 10¹⁵ and 8 × 10¹⁴ and 2 × 10¹⁶, respectively. After annealing and irradiation, the samples were characterized using atomic force imaging techniques to determine local changes in microstructure and mechanical properties. All samples annealed above 550 °C cracked. From the AFM results we observed both crack healing and significant modification of the surface at higher fluences.