| AAO模板制备条件的研究 |
| |
| 引用本文： | 王晓慧,李玉山,黄嘉成,刘海滨,黄民慧,龚晓钟.AAO模板制备条件的研究[J].化学工程师,2011(8):9-12,28. |
| |
| 作者姓名： | 王晓慧 李玉山 黄嘉成 刘海滨 黄民慧 龚晓钟 |
| |
| 作者单位： | 深圳大学化学与化工学院深圳市功能高分子重点实验室,广州深圳,518060 |
| |
| 基金项目： | 广东省科技计划项目(2006B14001001) |
| |
| 摘 要： | 为了得到高度有序的多孔阳极氧化铝(anodic aluminum oxide,AAO)模板,本文分别研究氧化电压、氧化温度、电解液种类、电解液浓度等影响因素对阳极氧化铝模板形成的影响,利用扫描电镜( SEM)观察不同条件下氧化铝膜的微观结构,从而得出了阳极氧化铝模板的最佳制备工艺范围:温度0～20℃,氧化电压35～50...
|
| 关 键 词： | 阳极氧化 多孔氧化铝 纳米结构材料 |
Study of preparation process of anodic aluminum oxide template |
| |
| WANG Xiao-hui,LI Yu-shan,HUANG Jia-cheng,UU Hai-bin,HUANG Min-hui,GONG Xiao-zhong.Study of preparation process of anodic aluminum oxide template[J].Chemical Engineer,2011(8):9-12,28. |
| |
| Authors: | WANG Xiao-hui LI Yu-shan HUANG Jia-cheng UU Hai-bin HUANG Min-hui GONG Xiao-zhong |
| |
| Affiliation: | WANG Xiao-hui,LI Yu-shan,HUANG Jia-cheng,LIU Hai-bin,HUANG Min-hui,GONG Xiao-zhong(College of Chemistry and Chemical Engineering,Shenzhen Key Laboratory of Functional Polymers,Shenzhen University,Shenzhen 518060,China) |
| |
| Abstract: | In order to obtain porous anodic alumina temp-late with highly ordered nanopore arrays.the effective factors such as the oxidizing time,the oxidizing voltage,the oxidizing temperature and concentration of electrolyte solutions are studied and then each effective fact or on fabricating porous anodic aluminum oxide membrane is respectively discussed.The optimal technique is confirmed that the temperature is 0～20℃,the oxidizing voltage is 35～55V,the optimal electrolyte solutions is oxalic acid and the concentration of electrolyte solutions is 0.3mol·dm-3. |
| |
| Keywords: | anodization anodic aluminum oxide nanomaterials of structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
