| 不同荷载作用下各向异性度对树脂基正交各向异性圆孔板孔边应力分布的影响 |
| |
| 引用本文： | 李成,铁瑛,赵华东. 不同荷载作用下各向异性度对树脂基正交各向异性圆孔板孔边应力分布的影响[J]. 高分子材料科学与工程, 2011, 0(12): 155-158 |
| |
| 作者姓名： | 李成 铁瑛 赵华东 |
| |
| 作者单位： | 郑州大学机械工程学院 |
| |
| 基金项目： | 国家自然科学基金资助项目(50975261);教育部科学技术研究重点项目(208082);人事部留学人员科技活动项目择优资助经费(优秀类)项目 |
| |
| 摘 要： | 含孔结构在机械结构、装备中随处可见。针对含圆孔的树脂基复合材料板,采用解析法对几种常见荷载对孔边应力场的影响进行分析。对两个主方向的杨氏模量的变化对孔边应力的影响进行仿真分析,并对在不同荷载作用下,各向异性度对孔边应力场的影响进行比较。通过计算可知,随着杨氏模量的增大,孔边应力也增大,且随杨氏模量E1增大所引起的孔边应...
|
| 关 键 词： | 含孔结构 复合材料 各向异性度 应力分布 结构优化 |
Effect of Anisotropy of Resin Matrix Composite Material Plate on Stresses Around Round Hole Under Different Load |
| |
| Cheng Li,Ying Tie,Huadong Zhao. Effect of Anisotropy of Resin Matrix Composite Material Plate on Stresses Around Round Hole Under Different Load[J]. Polymer Materials Science & Engineering, 2011, 0(12): 155-158 |
| |
| Authors: | Cheng Li Ying Tie Huadong Zhao |
| |
| Affiliation: | (School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China) |
| |
| Abstract: | The structures with hole are common in mechanical structure and devices.For resin composite plate with round hole,the calculation model was established based on Mathematica.The effects of different loads on stress field around hole were analyzed by analytical method.The influences of Young’s modulus in two main directions on the stress around hole were calculated.The effect of anisotropy on the stress around hole was compared.It is known by calculation that: With the increase of Young’s modulus,stress on the hole also increases,and the rate of the increase of the stress around the hole caused by the increase of Young′s modulus E1 is greater than the rate of the increase of the stress around the hole caused by E2.Under the Moment,the impact of the anisotropy of the material to the stress field is larger relative to stress state of the tension and compression load. |
| |
| Keywords: | structure with hole composite material anisotropy stress distribution structure optimization |
| 本文献已被 CNKI 等数据库收录！ |
