首页 | 本学科首页   官方微博 | 高级检索  
     

环氧树脂粘接润滑涂层摩擦学特性
引用本文:尹延国,姚巍,俞建卫,田明.环氧树脂粘接润滑涂层摩擦学特性[J].高分子材料科学与工程,2011(9):80-83,87.
作者姓名:尹延国  姚巍  俞建卫  田明
作者单位:合肥工业大学摩擦学研究所
基金项目:国家自然科学基金资助项目(50975072);教育部重点项目资助(108159)
摘    要:为研究环氧树脂粘接固体润滑涂层的摩擦磨损性能及机理,采用端面摩擦磨损试验机在干摩擦变载荷条件下进行了该涂层的摩擦磨损性能试验与分析,结果表明,试验初期涂层表面的环氧树脂与钢对偶件直接接触,减摩润滑效果不佳;随着载荷的增加与时间的延长,涂层表面逐渐形成固体润滑保护薄膜以及在对偶件表面形成转移润滑层,涂层进入稳定摩擦磨损阶段并显示出优异的减摩润滑性能;当载荷超过涂层承载能力时,涂层表面磨损加剧,直至涂层剥落、失效。

关 键 词:涂层  环氧树脂  润滑薄膜  摩擦  磨损

Tribological Properties of Epoxy Adhesive Lubricating Coating
Yanguo Yin,Wei Yao,Jianwei Yu,Ming Tian.Tribological Properties of Epoxy Adhesive Lubricating Coating[J].Polymer Materials Science & Engineering,2011(9):80-83,87.
Authors:Yanguo Yin  Wei Yao  Jianwei Yu  Ming Tian
Affiliation:(Institute of Tribology,Hefei University of Technology,Hefei 230009,China)
Abstract:In order to investigate the tribological properties and wear mechanisms of the epoxy adhesive solid lubricating composite coating,a tribometer with face-to-face contact friction couples was employed to measure the tribological properties under variable loads and dry friction conditions.The results show that at the initial friction stage the epoxy on the coating surface contacts the steel counterface and exhibits poor antifriction performance.And with the increase of load and friction time,a protection thin film on the coating surface and a transfer layer on the counterface are gradually formed and the friction comes to a stable stage,and the coating shows an excellent antifriction.When the load exceeds the load capacity of the coating,the wear of the coating becomes serious,the coating comes to peel off and fail.
Keywords:coating  epoxy  lubricating film  friction  wear
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号