| 设计图样中标注封头的最小成形厚度分析 |
| |
| 引用本文： | 赵德君.设计图样中标注封头的最小成形厚度分析[J].广西机械,2014(1):178-179. |
| |
| 作者姓名： | 赵德君 |
| |
| 作者单位： | 中国石油集团东北炼化工程有限公司锦州设计院,辽宁锦州121001 |
| |
| 摘 要： | 针对GB150中关于标注封头最小成形厚度的规定,以设计角度分析了封头最小成形厚度的组成及从设计、制造等诸多因素综合考虑的重要性.
|
| 关 键 词： | 最小成形厚度 名义厚度 厚度减薄率 |
Analysis of Minimum Thickness Marking Head in Design Drawings |
| |
| ZHAO De-jun.Analysis of Minimum Thickness Marking Head in Design Drawings[J].Guangxi Machinery,2014(1):178-179. |
| |
| Authors: | ZHAO De-jun |
| |
| Affiliation: | ZHAO De-jun (Jinzhou Design Institute of China Petroleum Group Northeast Refining ＆ Chemical Engineering Co., Ltd., Jinzhou Liaoning 121001, China) |
| |
| Abstract: | According to the provisions on the marking head minimum thickness in the design of GB150, analyzed the composition and thickness of the importance of the minimum head forming from the comprehensive consideration of many factors such as design, manufacturing. |
| |
| Keywords: | minimum thickness thickness thickness reduction ratio |
| 本文献已被 维普 等数据库收录！ |
