| 基于ANSYS的大容器气瓶有限元分析 |
| |
| 引用本文： | 董云海,隋希平,胡帅,李丹丹. 基于ANSYS的大容器气瓶有限元分析[J]. 装备制造技术, 2014, 0(7): 145-147 |
| |
| 作者姓名： | 董云海 隋希平 胡帅 李丹丹 |
| |
| 作者单位： | 中国船舶重工集团公司第七一八研究所,河北邯郸056027 |
| |
| 摘 要： | 传统的气瓶设计采用薄膜理论和第一强度理论进行设计,由于在设计中未对实际应力进行严格计算,设计选取的安全系数较大,经济性不好。利用ANSYS软件模拟气瓶加载后的应力、应变情况,揭示出了气瓶承载时的应力分布规律和变形情况,为气瓶的优化设计和可靠性设计奠定了坚实的基础。
|
| 关 键 词： | Y瓶 应力分析 爆破压力 ANSYS |
Finite Element Analysis of Large Capacity Cylinders based on ANSYS |
| |
| DONG Yun-hai,SUI Xi-ping,HU Shuai,LI Dan-dan. Finite Element Analysis of Large Capacity Cylinders based on ANSYS[J]. , 2014, 0(7): 145-147 |
| |
| Authors: | DONG Yun-hai SUI Xi-ping HU Shuai LI Dan-dan |
| |
| Affiliation: | (The 718th Research Institute of CSIS, Handan Hebei 056027, China) |
| |
| Abstract: | The traditional design of cylinder is usually based on the membrane theory and the first strength theory. Since the actual stress of the cylinder isn＇t calculate strictly in detail, the safety coefficient selected shall be greater and the economical shall be worse. ANSYS is adopted by simulating the stress and strain of the cylinder after loading to show the regularity of the stress distribution and the deformation,which will offer a solid foundation for the optimized and reliable design of cylinder. |
| |
| Keywords: | Y cylinder stress analysis bursting pressure |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
