| 热处理工艺对304L不锈钢/Gr70碳素钢爆炸复合板界面硬度的影响 |
| |
| 引用本文： | 李平仓,赵惠,刘燕平. 热处理工艺对304L不锈钢/Gr70碳素钢爆炸复合板界面硬度的影响[J]. 四川兵工学报, 2017, 0(2): 118-121. DOI: 10.11809/scbgxb2017.02.027 |
| |
| 作者姓名： | 李平仓 赵惠 刘燕平 |
| |
| 作者单位： | 1. 西安天力金属复合材料有限公司,西安,710201;2. 陕西省层状金属复合材料工程研究中心,西安,710201;3. 国家-地方联合工程研究中心,西安,710201 |
| |
| 基金项目： | 国家高技术研究发展技术项目(863计划)(2015AA03A501) |
| |
| 摘 要： | 通过对比分析不同热处理工艺对304L不锈钢复合板界面硬度及结合强度影响规律,发现随着回火温度的提高,钢侧硬度逐渐降低,而304L侧的界面硬度,当保温温度在640℃以上时,才开始下降.经对试验结果对比分析后发现,当回火热处理工艺为:640℃保温4h,炉冷,复合板界面硬度值降低至350HV且均匀,更便于后续加工使用.
|
| 关 键 词： | 热处理工艺 304L不锈钢复合板 界面硬度 |
Analysis on Interface Hardness of the Clad Plate with Different Heat Treatment Process |
| |
| LI Ping-cang,ZHAO Hui,LIU Yan-ping. Analysis on Interface Hardness of the Clad Plate with Different Heat Treatment Process[J]. , 2017, 0(2): 118-121. DOI: 10.11809/scbgxb2017.02.027 |
| |
| Authors: | LI Ping-cang ZHAO Hui LIU Yan-ping |
| |
| Abstract: | Through the comparative analysis of different heat treatment process on the combination of rule and impact strength of 304L stainless steel composite plate interface hardness,we found that with the increase of temperature,the hardness of steel decreased gradually,while when the heating temperature is over 640℃,the interface hardness of 304L side began to decline.By the comparative analysis of the test results,it showed that when the heat treatment craft:640℃,1 ～4 h,and furnace cooling,the interface hardness decreased to 350HV and uniformity,and it is more convenient for subsequent processing. |
| |
| Keywords: | heat treatment process 304L clad plate interface hardness |
| 本文献已被 万方数据 等数据库收录！ |
|
