| 不同起爆方式对钛/钢复合板质量的影响 |
| |
| 引用本文： | 樊科社,吴江涛,李平仓,王小林,张鹏辉,李进军.不同起爆方式对钛/钢复合板质量的影响[J].四川兵工学报,2017(8):175-177. |
| |
| 作者姓名： | 樊科社 吴江涛 李平仓 王小林 张鹏辉 李进军 |
| |
| 作者单位： | 1. 西安天力金属复合材料有限公司,西安,710201;2. 西安科技大学,西安,710054 |
| |
| 基金项目： | 国家高技术研究发展技术(863计划)项目(2015AA03A501) |
| |
| 摘 要： | 针对采用瞬发电雷管同时起爆多块复合板存在的爆破振动等有害现象,提出采用延时电雷管起爆,通过实验得到不同延时时间对应的安全板间距,进一步对比两种起爆方式下制备钛/钢复合板的外观品质、结合率及力学性能.当延时25 ms、50 ms,对应板间距分别大于临界板间距15 m、30 m时,采用延时电雷管起爆方式制备的钛/钢复合板性能完全满足要求,为延时起爆技术在爆炸复合中的应用提供了重要依据.
|
| 关 键 词： | 延时起爆 钛钢复合板 爆炸复合 |
Effect of Different Detonating Modes on the Properties of Ti-Steel Clad Plate |
| |
| Authors: | FAN Keshe WU Jiangtao LI Pincang WANG Xiaolin ZHANG Penghui LI Jinjun |
| |
| Abstract: | The instantaneous electric detonating is harmful to natural environment.The delay electric detonating was put forward.The effect of different detonating modes on the properties of Ti-steel clad plate was investigated.The result showed that when the distance between two clad plates is greater than the critical value,the properties of Ti-steel clad plate were met requirements by delay electric detonating modes which provides improtant reference for the application of delay electric detonating technology in explosive bonding. |
| |
| Keywords: | delay electric detonating Ti-steel clad plate explosive bonding |
| 本文献已被 万方数据 等数据库收录！ |
|
