| 基于ANSYS的隔膜泵十字头有限元分析 |
| |
| 引用本文： | 郝亮,黄艳萍,郝刚,管长焦.基于ANSYS的隔膜泵十字头有限元分析[J].煤矿机械,2012,33(1):92-93. |
| |
| 作者姓名： | 郝亮 黄艳萍 郝刚 管长焦 |
| |
| 作者单位： | 1. 三一重型装备有限公司,沈阳,110027
2. 煤炭科学研究总院沈阳研究院,辽宁抚顺,113122 |
| |
| 摘 要： | 采用ANSYS建立了隔膜泵十字头有限元模型,对最大工况情况下的十字头进行了静力学分析,并对最大工况下的滑道和滑履的接触比压进行了计算机模拟,从而为隔膜泵十字头的设计提供依据。
|
| 关 键 词： | 隔膜泵 十字头 ANSYS |
Finite Element Analysis of Crosshead in Diaphragm Pump Based on ANSYS |
| |
| HAO Liang
,
HUANG Yan-ping
,
HAO Gang
,
GUAN Chang-jiao.Finite Element Analysis of Crosshead in Diaphragm Pump Based on ANSYS[J].Coal Mine Machinery,2012,33(1):92-93. |
| |
| Authors: | HAO Liang HUANG Yan-ping HAO Gang GUAN Chang-jiao |
| |
| Affiliation: | 1.Sany Heavy Equipment Co.,Ltd.,Shenyang 110027,China;2.Shenyang Branch of China Coal Research Institute,Fushun 113122,China) |
| |
| Abstract: | Finite element model of crosshead in diaphragm pump based on ANSYS is established,based on the model,static stress analysis of crosshead under worst working condition is conducted,at the same time,specific pressure between sliding-shoe and sliding way is simulated,the analysis and simulation results will provide basic to further designing. |
| |
| Keywords: | diaphragm pump crosshead ANSYS |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
