| CVT效率台架试验与分析 |
| |
| 引用本文： | 黄宏成,徐继财,闻居博.CVT效率台架试验与分析[J].传动技术(上海),2010,24(2):37-41. |
| |
| 作者姓名： | 黄宏成 徐继财 闻居博 |
| |
| 作者单位： | 上海交通大学汽车电子控制技术国家工程实验室;上海交通大学汽车电子控制技术国家工程实验室;上海交通大学汽车电子控制技术国家工程实验室 |
| |
| 摘 要： | 在专用的CVT动力总成(Powertrain)测试台架上,通过CVT性能试验,分析了其调速特性,利用该特性设计了CVT系统效率试验方法,试验结果表明,CVT传动比大于1.5,转矩比在0.4-0.9间 ,传动效率较高.
|
| 关 键 词： | CVT 传动效率 台架试验 |
Test and Analysis CVT Efficiency |
| |
| Huang Hongcheng Xu Jicai Wen Jubo National Engineering Laboratory for Automotive Electronics Control Techniques,Shanghai Jiaotong University.Test and Analysis CVT Efficiency[J].Drive System Technique,2010,24(2):37-41. |
| |
| Authors: | Huang Hongcheng Xu Jicai Wen Jubo National Engineering Laboratory for Automotive Electronics Control Techniques Shanghai Jiaotong University |
| |
| Abstract: | CVT performance test was taken on special powertrain bench for CVT.The governing characteristic was analysed,according to which the CVT system efficiency test method was designed.The test result shows that the efficiency is high when CVT gear ratio is above 1.5,torque ratio is between 0.4 and 0.9. |
| |
| Keywords: | CVT |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
