首页 | 本学科首页   官方微博 | 高级检索  
     

定向钢纤维水泥基复合材料断裂理论分析及试验
引用本文:卿龙邦,聂雅彤,慕儒,程兰婷,王晓伟. 定向钢纤维水泥基复合材料断裂理论分析及试验[J]. 材料科学与工程学报, 2017, 35(2). DOI: 10.14136/j.cnki.issn 1673-2812.2017.02.015
作者姓名:卿龙邦  聂雅彤  慕儒  程兰婷  王晓伟
作者单位:河北工业大学土木与交通学院,天津,300401
基金项目:国家自然科学基金资助项目,河北省高等学校科学技术研究重点资助项目,高等学校博士学科点专项科研基金资助项目,河北省自然科学基金资助项目
摘    要:基于非线性铰模型研究了定向钢纤维水泥基复合材料的裂缝断裂全过程理论分析方法,结合不同尺寸试件的三点弯曲梁断裂试验对本文方法进行了验证。进而利用该方法预测了大尺寸三点弯曲梁试件的裂缝断裂全过程,并研究了试件尺寸对名义强度的影响。通过理论分析与试验结果对比,表明本文方法可较好地预测定向钢纤维水泥基复合材料的裂缝断裂全过程;此外,定向钢纤维水泥基复合材料的名义强度存在一定的尺寸效应,但尺寸效应表现不明显。

关 键 词:定向钢纤维  水泥基复合材料  铰模型  名义强度  尺寸效应

Theoretical Analysis and Experimental Study on Fracture Behavior of Aligned Steel Fibre Cement-based Composites
QING Longbang,NIE Yatong,MU Ru,CHENG Lanting,WANG Xiaowei. Theoretical Analysis and Experimental Study on Fracture Behavior of Aligned Steel Fibre Cement-based Composites[J]. Journal of Materials Science and Engineering, 2017, 35(2). DOI: 10.14136/j.cnki.issn 1673-2812.2017.02.015
Authors:QING Longbang  NIE Yatong  MU Ru  CHENG Lanting  WANG Xiaowei
Abstract:A method for theoretical analysis of crack fracture process of aligned steel fibre cement-based composites was studied based on the non-linear hinge model.This method was verified by tests on three-point bending of notched beams with different sizes.The crack fracture process of the aligned steel fibre cementbased composites with larger sizes was predicted and the influence of specimen size on nominal strength was discussed.The theoretical results were compared with the experimental results.The comparison showed that this method can be used to predict the crack fracture process of aligned steel fibre cement-based composites.Moreover,the size effect on the nominal strength of aligned steel fibre cement-based composites was not obvious.
Keywords:aligned steel fibre  cement-based composites  hinge model  nominal strength  size effect
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号