| 提高宽厚板产品成材率措施分析 |
| |
| 引用本文： | 于峰,曲圣昱,王明林.提高宽厚板产品成材率措施分析[J].鞍钢技术,2007(2):23-27. |
| |
| 作者姓名： | 于峰 曲圣昱 王明林 |
| |
| 作者单位： | 鞍钢股份有限公司中厚板厂;鞍钢股份有限公司中厚板厂;鞍钢股份有限公司中厚板厂 |
| |
| 摘 要： | 阐述了宽厚板轧制过程中金属的变形规律和厚板轧制工艺特点.针对鞍钢鲅鱼圈5500宽厚板生产线实际,提出应采用立辊轧制与MAS轧制相结合的方法,同时引进先进的设备和检测仪器,优化工艺,有效提高宽厚板产品的成材率.
|
| 关 键 词： | 宽厚板 成材率 轧制方式 |
| 文章编号： | 1006-4613（2007）02-0023-05 |
| 收稿时间： | 2007-01-04 |
| 修稿时间： | 2007年1月4日 |
Analysis on Measures Increasing Rolling Yield of Wide Heavy Steel Plate |
| |
| Yu Feng,Qu Shengyu,Wang Minglin.Analysis on Measures Increasing Rolling Yield of Wide Heavy Steel Plate[J].Aisc Techniques,2007(2):23-27. |
| |
| Authors: | Yu Feng Qu Shengyu Wang Minglin |
| |
| Abstract: | Deformation regulations of metal and technical characteristics of rolling heavy plate during rolling wide heavy plate are explained. According to practical situation of 5500 wide heavy plate production line in Angang Bayuquan project, vertical pass rolling should be combined with MAS rolling and advanced equipments and test devices are introduced at the same time to optimize technique so as to efficiently increase wide heavy plate rolling yield. |
| |
| Keywords: | wide heavy plate rolling yield rolling method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
