首页 | 本学科首页   官方微博 | 高级检索  
     

级联SVG控制系统设计与仿真
引用本文:巩晶晶,智泽英,李宁.级联SVG控制系统设计与仿真[J].工业控制计算机,2014(2):74-76.
作者姓名:巩晶晶  智泽英  李宁
作者单位:太原科技大学
基金项目:同洲电子科技创新基金(TZ201328)
摘    要:针对SVG模型的非线性,强耦合的特点,提出了一种采用以微分几何为基础,运用精确线性化的原理设计控制器,使SVG这个强耦合非线性的系统解耦,分别对有功电流和无功电流进行控制。对于SVG直流侧电容电压的控制,采用PI控制器来控制,通过调节PI调节器的参数来维持直流侧电容电压的稳定。最后,在MATLAB上建立了SVG的仿真模型,仿真结果验证了算法的正确性。

关 键 词:SVG  精确线性化  系统解耦  MATLAB

Design and Simulation of Cascaded SVG Control Strategy
Affiliation:Gong Jingjing;
Abstract:Aiming at SVG model of nonlinear,strong coupling characteristic,this paper put forward a kind of use based on the dif- ferential geometry,using the principle of exact linearization to design the controller,what makes the SVG deCOUloling,the strong coupling nonlinear system respectively to control the active current and reactive current.For SVG DC side capacitor voltage control,using PI controller to control,by adjusting the parameters of PI controller to maintain the stability of the DC side capacitor voltage.Finally,the SVG simulation model is established on MATLAB,the simulation results verify the correct- ness of the algorithm.
Keywords:SVG  exact linearization  system decoupling  MATLAB
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号