| 双联塑料齿轮注射模设计制造 |
| |
| 引用本文： | 伍先明,陈贤勇.双联塑料齿轮注射模设计制造[J].模具工业,2005(10):31-33. |
| |
| 作者姓名： | 伍先明 陈贤勇 |
| |
| 作者单位： | 湖南科技大学 湖南湘潭411201
(伍先明)，广东美的空调实业部 广东顺德528300(陈贤勇) |
| |
| 摘 要： | 分析了双联塑料齿轮的结构特点和成型工艺性,阐述了4个分型面的设计依据和模具的工作过程,以及为了保证塑件的精度在齿轮型腔制造上采取的工艺方法。
|
| 关 键 词： | 双联塑料齿轮 分型面 型腔制造 |
| 文章编号： | 1001-2168(2005)10-0031-03 |
| 收稿时间： | 04 19 2005 12:00AM |
| 修稿时间： | 2005年4月19日 |
Design and Manufacture of the Injection Mould for Plastic Duplex Gear |
| |
| WU Xian-ming, CHEN Xian-yong.Design and Manufacture of the Injection Mould for Plastic Duplex Gear[J].Die & Mould Industry,2005(10):31-33. |
| |
| Authors: | WU Xian-ming CHEN Xian-yong |
| |
| Affiliation: | 1. Hunan University of Science and Technology, Xiangtan, Hunan 411201, China; 2. Guangdong Midea Air-condition Industry Depamnent, Shunde, Guangdong 528300, China |
| |
| Abstract: | The design feature and the forming technology of the plastic duplex gear were analyzed.The design considerations about4parting surfaces,the working process of the mould and the technological process in the gear cavity manufacture in order to guarantee the precision of the plastic parts were discussed. |
| |
| Keywords: | plastic duplex gear parting surface mould cavity manufacture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
